|
Product Details:
|
| Cable Name: | F/UTP Cat6a Computer Ethernet Cable | Category TYPE: | Cat 6A Gigabit Lan Cable |
|---|---|---|---|
| Conductor Materoa;: | Bare Copper | Conductor Size: | 23 Awg 0.57mm |
| Shieled: | Foil Shieled | Jacket: | LSZH |
| Packing: | 305M Drum | OEM: | OK On Cable And Drum Sticker |
| High Light: | Cat6A FTP Cable 0.58MM,Cat6A FTP Cable 305m,305m 10G Network Cable |
||
Cat6A FTP Cable 10G 0.58MM 305mtr Drum Internet Ethernet Cable
In the market day by day people are needing for higher bandwidth and lower latency in physical network infrastructure, thus leading to the high growing demand for higher performance CAT 6A cable . Cat6A cable not only deliver data upto 10 Gbase-T but also perform with a frequency up to 500MHZ.
F/UTP consists of 4/23AWG unshielded twisted-pair wires surrounded by an overall aluminum foil shield, with a center spline (or cross member) separating each pair.
F/UTP cables, which have very closely shielded individual pairs, provide superior crosstalk and EMI performance
SL solid cables are the best twisted-pair cables in the market for transmitting data over local area Networks (LANs). SL cables exceed performance requirements specified by the TIA/EIA-568B.2 / TIA/EIA-568C.2 and IEC 60603-7-4 standards.
APPLICATION
• 10BASE-T, 100BASE-TX Fast Ethernet,
1000BASE-T (IEEE802.3)
• 100VG-AnyLAN (IEEE802.12)
• 1000 MHz Broadband Video
• Voice, T1, ISDN
• 155/ 622 Mbps ATM
• Power over Ethernet (POE)
STANDARDS
• Designed and constructed to give optimum electrical performance to the following standards:
• ISO/IEC 11801 Class EA, IEC 61156-5
• EN50173-1 and EN 50288-10-1
• ANSI/TIA 568.2-D
• Supports 10GBASE-T and meets the design requirements of 802.11ac wireless. Recommended for PoE standards:
• IEEE 802.3bt PoE Type 1 (15.4 Watts) formerly 802.3af
• IEEE 802.3bt PoE Type 2 (30 Watts) formerly 802.3at
• IEEE 802.3bt PoE Type 3 (60 Watts)
• IEEE 802.3bt PoE Type 4 (90 Watts)
• Cisco UPoE (60 Watts) and Cisco UPoE+ (90 Watts)
• Power over HDBaseT™ PoH (95 Watts)
| Electrical characteristics Value | |
| DC resistance max | 9.38 Ohm/100m |
| DC resistance unbalance | Max 5% |
| Mutual capacitance | Max 5.6 nF/100m |
| Capacitance unbalance pair | Max 330pF/100m |
| Impedance 1-250 MHz | 100 15 |
| Propagation delay | Max. 534 ns/100m@ 500 MHz |
| Dielectric strength | DC KV/sec. 2.5/2 |
| Propagation delay skew | Max 45 ns/100m |
| Insulation resistance - MΩ/km | Min.5000 |
| Nominal velocity of propagation |
69%
|
Ordering Information
| Part number | Description |
| SL-FUTP-C6A-PVC-GY | F/UTP - Foiled Unshielded Twisted Pair ,Category 6A, 4Pair, Solid PVC,305m Box |
| SL-FUTP-C6A-LSZH-GY | F/UTP - Foiled Unshielded Twisted Pair ,Category 6A, 4Pair, Solid LSZH,305m Box |
| PS: Also, available in Black (BK), Blue (BL), Green(GN), Orange (OR), Red (RD), White (WH), Yellow (YL) for bulk orders | |
Q1: Is it possible to customize our brand information on the cable?
A: Yes, we can print your brand name on the cable jacket and 3KM total cable length is requested.
Q2: Can you pass FLUKE test?
A: Yes, all SL networking cable can pass Fluke channel, component and permanent link test per customers' request.
Q3: What is your MOQ of your products?
A: We only have MOQ for some special jacket color, we request 3km as the total length of the bulk cable, you may consider stock
the bulk cable with us for your urgent order production.
Q4: Are free samples available from you?
A: Yes, we are always happy to offer the free samples for all of our customers' projects provided that the total cost is under
50 US dollars.
Q5: Do you accept OEM and ODM orders?
A: Absolutely yes, we have been doing OEM services since we start in this business, and for every single label, printing, bag
and carton design, we always treat it seriously and do it nicely. Our engineers can help you with your current design and even
can open the new tooling for your specific project.
Q6 : Are You Factory ?
A 6: Yes, our cable factory have 13 years production experience.
Contact Person: Miss. LISA
Tel: 008614774785274
