|Model:||LC / UPC||Color:||Blue|
|Cable Diameter:||0.9, 2.0,3.0mm||Polishing:||UPC Type|
3.0mm Fiber Optic Quick Connectors,
3.0mm Mechanical Fiber Connectors,
LC APC Mechanical Fiber Connectors
Fiber Optic LC APC UPC Quick Connector Cost Effective Fiber Optical Fast Connector
SL Mechanical Field-Mountable Fiber Optic Connector (FMC) is designed to simple the connection without fusion splicing machine. This connector is quick assembly which requires only normal fiber preparation tools: cable stripping tool and fiber cleaver. The connector adopts Fiber Pre-Embeded Tech with superior ceramic ferrule and aluminum alloy V-groove. Also, transparent design of the side cover which allows visual inspection.
SL Fast connector is a good solution to field wiring and fiber-to-the home engineering connector. Assembly without glue, grinding and electrical tools, is widely used in construction section, the place need to quickly connect, to provide a fast and stable connector for the operation. It adopts the latest fiber formed technology. All the optical and mechanical index meet the patch cord standard, to achieve to make the patch cord via mechanical cold junction, it change the traditional splice opinion, offer the powerfull support for FTTx.
1.Low insertion loss
2.High return loss (low amounts of reflection at the interface)
3.Ease of installation
6.Low environmental sensitivity
7.Ease of use
2.Active device termination
5.Local Area Networks (LANs)
6.Data processing networks
9.Wide Area Networks(WANs)
|Connector Type||LC||Polishing||UPC or APC|
|Cable Diameters||0.9/2.0/3.0 Simplex Cable 2x3 FTTH Drop Cable|
|Insertion Loss||≤ 0.3dB (typical)；
≤ 0.5dB (Max)；
|Return Loss||UPC ≥ 40dB
APC ≥ 50dB
|Tension Strength||≥ 30N||Operationg Temp||-40 ~ +75 ℃|
|3D Interfercometer (Only available if customer requested)|
|Type||Radius (mm)||Apex offset (um)||Fiber (nm)|
|PC (Φ 2.5mm )||10 ~ 25||≤ 70||-100~+100|
|APC (Φ 2.5mm )||5~ 15||≤ 70||-100~+100|
Assembly of the connector requires only normal fiber preparation tools: a fiber stripping tool, wipes and a fiber cleaver. They don’t need to polishing, no epoxy, No electrical power supply, no fused the fiber. Just Strip the buffer, cleave and clean the fiber and then insert the fiber into the Fast Connector. Installation takes just minutes and couldn't be easier.
• FTTH Drop cable stripper, To strip the Bow type 2x3mm Drop cable
• 0.9mm/2.0mm/3.0mm Fiber Cable Stripper. To Strip those round cable and bare fiber of 2x3mm Drop cable
• Fiber cleaver to cut the fiber of Cable&Fiber
• Use the Length guard board cut the fiber in requested length,.
• Alcohol, For Fiber Clean after cut
• Cleanroom Wipes, for Fiber Clean after Alcohol Cleaned.
Other Type of Connectors
Contact Person: sales