|
Product Details:
|
| Model: | LC / APC | Color: | Green Color |
|---|---|---|---|
| Cable Diameter: | 0.9mm, 2.0mm,3.0mm | Polishing: | APC Type |
| OEM: | OK | HS CODE: | 85367000 |
| High Light: | 2.0mm Fiber Optic Fast Connector,Fiber Optic Fast Connector Singlemode,2.0mm lc apc fiber connector |
||
LC / APC Green Color Stock Fiber Optic Fast Connector Singlemode Quick Connector
SL Fast Connector is a revolutionary field installable optical fiber connector that requires no epoxy and no polishing. The unique design of the patented mechanical splice body incorporates a factory-mounted fiber stub and a pre-polished ceramic ferrule. Using this onsite assembly optical connector, it is possible to improve the flexibility of optical wiring design as well as reducing the time required for fiber termination. The Fast connector series are already a popular solution for optical wiring inside buildings and floors for LAN & CCTV applications and FTTH.
SL Fast connector is a good solution to field wiring and fiber-to-the home engineering connector. Assembly without glue, grinding and electrical tools, is widely used in construction section, the place need to quickly connect, to provide a fast and stable connector for the operation. It adopts the latest fiber formed technology. All the optical and mechanical index meet the patch cord standard, to achieve to make the patch cord via mechanical cold junction, it change the traditional splice opinion, offer the powerfull support for FTTx.
Feature:
1. Low insertion loss
2. High return loss (low amounts of reflection at the interface)
3. Ease of installation
4. Low cost
5. Reliability
6. Low environmental sensitivity
7. Ease of use
Application:
1.CATV
2.Active device termination
3.Telecommunication networks
4.Metro
5.Local Area Networks (LANs)
6.Data processing networks
7.Test equipment
8.Premise installation
9.Wide Area Networks(WANs)
Details:
| Part Number | SL-P-LC | Length | 60mm |
| Connector Type | LC | Polishing | UPC or APC |
| Ferrule | Ceramic | V-Groove | Plastic material |
| Cable Diameters | 0.9/2.0/3.0 Simplex Cable 2x3 FTTH Drop Cable | ||
| Insertion Loss | ≤ 0.3dB (typical)； ≤ 0.5dB (Max)； |
Return Loss | UPC ≥ 40dB APC ≥ 50dB |
| Tension Strength | ≥ 30N | Operationg Temp | -40 ~ +75 ℃ |
| 3D Interfercometer (Only available if customer requested) | |||
| Type | Radius (mm) | Apex offset (um) | Fiber (nm) |
| PC (Φ 2.5mm ) | 10 ~ 25 | ≤ 70 | -100~+100 |
| APC (Φ 2.5mm ) | 5~ 15 | ≤ 70 | -100~+100 |
Installation Introduction:
Assembly of the connector requires only normal fiber preparation tools: a fiber stripping tool, wipes and a fiber cleaver. They don’t need to polishing, no epoxy, No electrical power supply, no fused the fiber. Just Strip the buffer, cleave and clean the fiber and then insert the fiber into the Fast Connector. Installation takes just minutes and couldn't be easier.
• FTTH Drop cable stripper, To strip the Bow type 2x3mm Drop cable
• 0.9mm/2.0mm/3.0mm Fiber Cable Stripper. To Strip those round cable and bare fiber of 2x3mm Drop cable
• Fiber cleaver to cut the fiber of Cable&Fiber
• Use the Length guard board cut the fiber in requested length,.
• Alcohol, For Fiber Clean after cut
• Cleanroom Wipes, for Fiber Clean after Alcohol Cleaned.
Other Type of Connectors
Contact Person: Miss. LISA
Tel: 008614774785274
