|
Product Details:
|
| Model: | SC / APC SL-F-FCN-51 | Color: | Green |
|---|---|---|---|
| Cable Diameter: | 2.0mm,3.0mm Cable | Polishing: | APC |
| Warranty: | 1 Year | Applications: | Drop Cable.Indoor Cable |
| Fiber Type: | Single Mode Or Multi Mode | Material: | Plastic |
| High Light: | ESC250d Fiber Optic Fast Connector,ESC250d ftth fast connector,ESC250d ftth cable connector |
||
SC / APC Fiber Optic Fast Connector Field Assembly Quick Connector FTTH ESC250d
SL Fast connector is a good solution to field wiring and fiber-to-the home engineering connector. Assembly without glue, grinding and electrical
Field Assembly SC/PC fast connector for FTTH can provide a quick and easy termination of fibers in the field. Options are
available for 900 micron allowing the installer to terminate and make connection in minutes at equipment and fiber patch panels. This connector system removes any requirement for epoxy, adhesives or costly curing ovens and polishing and fibe ederface inspection.
Features:
--- Can be used 10 times
--- Low insertion loss
--- Compatible with standard SC connectors;
--- Field installable, cost effective, user friendly;
--- UPC, APC polishing optional;
--- No electricity required;
--- FTTH cable, fiber optic cable optional;
--- Reliable durable and superior optical performance.
Application:
1. CATV
2. Active device termination
3. Telecommunication networks
4. Metro
5. Local Area Networks (LANs)
6. Data processing networks
Details:
| Part Number | SL-F-FCN-51 | Length | 51 mm |
| Connector Type | SC | Polishing | UPC or APC |
| Ferrule | Ceramic | V-Groove | Plastic material |
| Cable Diameters | 0.9/2.0/3.0 Simplex Cable 2x3 FTTH Drop Cable | ||
| Insertion Loss | ≤ 0.3dB (typical)； ≤ 0.5dB (Max)； |
Return Loss | UPC ≥ 40dB APC ≥ 50dB |
| Tension Strength | ≥ 30N | Operationg Temp | -40 ~ +75 ℃ |
| 3D Interfercometer (Only available if customer requested) | |||
| Type | Radius (mm) | Apex offset (um) | Fiber (nm) |
| PC (Φ 2.5mm ) | 10 ~ 25 | ≤ 70 | -100~+100 |
| APC (Φ 2.5mm ) | 5~ 15 | ≤ 70 | -100~+100 |
Installation Introduction:
Assembly of the connector requires only normal fiber preparation tools: a fiber stripping tool, wipes and a fiber cleaver. They don’t need to polishing, no epoxy, No electrical power supply, no fused the fiber. Just Strip the buffer, cleave and clean the fiber and then insert the fiber into the Fast Connector. Installation takes just minutes and couldn't be easier.
• FTTH Drop cable stripper, To strip the Bow type 2x3mm Drop cable
• 0.9mm/2.0mm/3.0mm Fiber Cable Stripper. To Strip those round cable and bare fiber of 2x3mm Drop cable
• Fiber cleaver to cut the fiber of Cable&Fiber
• Use the Length guard board cut the fiber in requested length,.
• Alcohol, For Fiber Clean after cut
• Cleanroom Wipes, for Fiber Clean after Alcohol Cleaned.
Other Type of Connectors.
Contact Person: Miss. LISA
Tel: 008614774785274
